Tencent Digital (Blue) has previously announced that HTC will launch a new machine for US operator Sprint, which may be named HTC Bolt. Now, the big god @evleaks has exposed the machine's renderings for the first time on Twitter, but it seems that the appearance of the machine is not very different from that of the HTC 10, but only the position of the front lens, sensors, and flash. Adjustment. It is said that it will be the successor to the 2011 HTC ThunderBolt and is expected to be officially launched around October 18.

Rendering exposure

According to the HTC Bolt render of the exposure of the big god @evleaks, the machine continued the appearance of the HTC 10 as a whole, and only made changes in some details, such as the exchange of the position of the front lens and the sensor. And it seems that the size has become smaller; at the same time, the 3.5mm headphone connector no longer appears on the top of the phone, and the dual LED flash has also changed from the right side of the previous camera to the top, and the laser focus module has also been removed.

In addition, HTC Bolt also seems to add a microphone to the rear antenna strip. At the same time, two SIM card slots on the side of the fuselage indicate that the aircraft should support dual-card dual standby. However, despite the introduction of the model for the US operator Sprint, although it should support the telecommunications network, this time it did not put on the operator's Logo.

Snapdragon 810 processor

However, the big news @evleaks did not leak information on the specifications of this aircraft, but it was reported that HTC Bolt did not carry Xiaolong 820 processor, but loaded the previous generation of Xiaolong 810 processor, and there will be international Released. In addition, according to the well-known broke people @upleaks said on the microblogging, the machine's code name is "Acadia", it will be canceled 3.5mm headphone jack, so it is likely to use the Type-C interface like music as super cell phone Complete data transmission, fast charging and external headphones.

As for the other configuration aspects of HTC Bolt, @upleaks did not disclose information on other hardware specifications other than confirming that it was equipped with an MSM8894 processor, but it is expected that it will have a 4GB RAM+32GB ROM storage portfolio. There is no exact information as to whether the camera specifications have changed. In addition, due to the October 18th date on the standby desktop of the aircraft, it is widely speculated that HTC Bolt will officially meet with us next month, but according to @upleaks, the aircraft will not have a BNM version. .

6V Dc Vibration Motor

Vibration Motor is in the original basis to add a vibrating head, made into a Dc Motor drive with a vibration motor. To produce the shaking force.


6V Dc Vibration Motor is introduced:

6V Dc Vibration Motor volume is generally greater than 15 mm, mainly used in massage chair, massage waist, handheld massager, etc.




Characteristics: small volume, strong vibration;


Features: small size, fast speed, stable performance, low price, can use battery drive,Can change the different materials of the pendulum head
6V Dc Vibration Motor 6V Dc Vibration Motor
Method of use: the best stable in horizontal plane, installed on the dc 6V Dc Vibration Motor output shaft parts, cannot use a hammer to knock, knock prone to press into the dc 6V Dc Vibration Motor drive, may cause damage to internal components, and cannot be used in the case of blocked.

vibration motor

Operating temperature range:

6V Dc Vibration Motor should be used at a temperature of -10~60℃.

The figures stated in the catalog specifications are based on use at ordinary room temperature catalog specifications re based on use at ordinary room temperature (approximately20~25℃.

If a vibration motor is used outside the prescribed temperature range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.Depending on the temperature conditions ,it may be possible to deal with them by changing the grease of the motor's parts.Please feel free to consult with us about this.


Storage temperature range:

Dc Vibration Motor should be stored ta a temperature of -15~65℃.

In case of storage outside this range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.


Service life:

The longevity of Dc Vibration Motor is greatly affected by the load conditions , the mode of operation,the environment of use ,etc.Therefore,it is necessary to check the conditions under which the product will actually be used .The following conditions will have a negative effect on longevity.Please consult with us should any of them apply.


●Use with a load that exceeds the rated torque

●Frequent starting

●Momentary reversals of turning direction

●Impact loads

●Long-term continuous operation

●Forced turning using the output shaft

●Use in which the permitted overhang load or the permitted thrust load is exceeded

●A pulse drive ,e.g.,a short break,counter electromotive force,PWM control

●Use of a voltage that is nonstandard as regards the rated voltage

●Use outside the prescribed temperature or relative-humidity range,or in a special environment.

●Please consult with us about these or any other conditions of use that may apply,so that we can be sure that you select the most appropriate model.


when it come to volume production,we're a major player as well .each month,we rurn out 600000 units,all of which are compliant with the rohs directive.Have any questions or special needed, please contact us, we have the engineer group and best sales department to service to you Looking forward to your inquiry. Welcome to our factory.

vibration motor

6V Dc Vibration Motor,Dc Vibration Motor,6V Dc Micro Vibration Motor,Small Size 6V Dc Vibration Motor

Shenzhen Shunchang Motor Co., LTD. , https://www.scgearmotor.com